How to use your laptop Targus combination lock

How to use your laptop Targus combination lock

Document number: 39089

For your initial use of the lock you will need a screwdriver to reset the combination. Do not leave the combination on its default setting! Please keep in mind that this is effective against a quick snatch and grab, but all cable systems are readily cut. Use locked doors in addition to the cable whenever practicable.

Setting the combination
Securing the cable to an object
Securing the lock to the computer

Setting the combination

On one end of the locking mechanism is the reset screw.You will need a small flat head screwdriver to push in and turn that reset screw. Because the screw head is inset, neither a dime nor your fingernail are likely to work as a substitute screwdriver.

To reset the combination:

Turn the lock so you can see the combination window.
The default combination is 0000. Rotate the combination dials until all four windows show a 0.
On the end of the lock is a reset screw.
Using a small flat-head screwdriver or similar object, push in and rotate the reset screw 90 degrees clockwise so that the screw’s groove appears horizontal.
Using the dials, enter the new combination.
To save the new combination rotate the reset screw 90 degrees
counter-clockwise, back to its original vertical position.

Securing the cable to an object

To secure your computer you will need to find a stable and secure object to attach the cable.You will need to wrap the cable around something like legs or a handle.
Your lock has a cable with a loop on one end, and the lock attachment on the other.
Wrap the loop end of the cable around the selected stable object, then push the lock through the loop end.
When you pull the lock through you will have a slip loop around your secure object.

Securing the lock to the computer

On your machine locate the security lock slot where you will be attaching the lock.

Toshiba Portege 2000 it is on the left edge of the machine, at the very back.
Toshiba Portege 3110 it is on the right edge of the machine, at the very back.
Toshiba Tecra 550 it is on the right edge of the machine, near the front..
Toshiba Tecra 8000 it is on the left edge of the machine, at the very back.
Toshiba Tecra 8100 it is on the right edge of the machine, at the very back.
Toshiba Tecra 8200 it is on the right edge of the machine, at the very back.
Toshiba Tecra 9000 it is on the right edge of the machine, near the back.
Toshiba Tecra 9100 it is on the right edge of the machine, near the back.
Toshiba Tecra M1 it is on the left edge of the machine, near the back.
IBM T40 and T41 it is on the left edge of the machine, at the very back.

Rotate the number dials on the lock until the correct numbers appear in the combination windows.
Press and hold the locking button to align the locking teeth.
Insert the locking teeth end of your computer lock into the computer’s lock slot and release the locking button.
Turn the dials of the lock so the combination is not showing.
Using the Spacers:
- Due to the variation in the size of the security slots on various notebook models, you may find that there is some slack between the lock and the computer. The supplied spacers are the best solution for optimal fit and security. To use the security spacers, please follow the instructions below.
- Try each of the SecureSpacers to determine which one fits the gap. The SecureSpacers come in three sizes: 1.6 mm, 0.8 mm, and 0.4 mm..
  *** DO NOT remove the adhesive strip from any of the SecureSpacers until you decide which one to use.
- Once you know which SecureSpacer you are going to use, remove the locking device from the computer. Then remove the adhesive strip from the back of the SecureSpacer and attach the spacer to the lock.